nginx

投稿日 2019年11月6日 23:11 by おっとっとっと

参考　nginx の最新版を Ubuntu 18.04 に apt インストールする

公式nginxをRedayNAS-212のリポジトリにnginxの配布キーを追加して自動インストールする方法です。

sources.list　の中がdebian jessieだらけなので debianにしてもubuntuにしても　サポート外判定でした。

# (1) Ubuntu に nginx リポジトリを登録する
# wget https://nginx.org/keys/nginx_signing.key
# apt-key add nginx_signing.key
# (2) リポジトリを一覧に追加
# vi /etc/apt/sources.list で下の行を追加
deb http://nginx.org/packages/debian/ jessie nginx
または
deb http://nginx.org/packages/ubuntu/ jessie nginx
# (3) アップデートで、nginxをインストール
# apt update

# apt update
Hit:1 http://security.debian.org jessie/updates InRelease
Ign:2 http://mirrors.edge.kernel.org/debian jessie InRelease
Get:3 http://nginx.org/packages/debian jessie InRelease [2,856 B]
Hit:4 http://mirrors.edge.kernel.org/debian jessie Release
Hit:5 https://apt.readynas.com/packages/readynasos 6.10.2 InRelease
Fetched 2,856 B in 1s (2,356 B/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
22 packages can be upgraded. Run 'apt list --upgradable' to see them.
N: Skipping acquire of configured file 'nginx/binary-armel/Packages' as repository 'http://nginx.org/packages/debian jessie InRelease' doesn't support architecture 'armel'
N: Skipping acquire of configured file 'nginx/binary-armhf/Packages' as repository 'http://nginx.org/packages/debian jessie InRelease' doesn't support architecture 'armhf'

またコンパイルするのか・・・
その前にツールでOSのバージョンを確認。

# apt-get install lsb-release
lsb_release -a
 No LSB modules are available.
 Distributor ID: Debian
 Description:    Debian GNU/Linux 8.11 (jessie)
 Release:        8.11
 Codename:       jessie
# apt-get update
# apt-get build-dep nginx
# apt-get source nginx
# cd nginx-1.17.0
# sudo dpkg-buildpackage -uc -b
# cd
# sudo dpkg -i nginx_1.17.0-1~stretch_armhf.deb

apt-get install debian-keyring
でもダメ

# wget http://nginx.org/download/nginx-1.16.1.tar.gz
# tar xvzf nginx-1.16.1.tar.gz
# cd nginx-1.16.1
# ./configure
./configure: error: the HTTP rewrite module requires the PCRE library.
You can either disable the module by using --without-http_rewrite_module
option, or install the PCRE library into the system, or build the PCRE library
statically from the source with nginx by using --with-pcre=<path> option.

正規表現ライブラリィが必須らしい。

# apt-get install libpcre3 libpcre3-dev
＃./configure
Configuration summary
  + using system PCRE library
  + OpenSSL library is not used
  + using system zlib library
  nginx path prefix: "/usr/local/nginx"
  nginx binary file: "/usr/local/nginx/sbin/nginx"
  nginx modules path: "/usr/local/nginx/modules"
  nginx configuration prefix: "/usr/local/nginx/conf"
  nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
  nginx pid file: "/usr/local/nginx/logs/nginx.pid"
  nginx error log file: "/usr/local/nginx/logs/error.log"
  nginx http access log file: "/usr/local/nginx/logs/access.log"
  nginx http client request body temporary files: "client_body_temp"
  nginx http proxy temporary files: "proxy_temp"
  nginx http fastcgi temporary files: "fastcgi_temp"
  nginx http uwsgi temporary files: "uwsgi_temp"
  nginx http scgi temporary files: "scgi_temp"

zlibパッケージの取得 

# apt-get install zlib1g-dev

openssh1.1.0のインストール 

# cd /usr/local/src
# wget https://www.openssl.org/source/openssl-1.1.0f.tar.gz
# tar xvzf openssl-1.1.0f.tar.gz
# cd openssl-1.1.0f/
# ./config --prefix=/usr/local/openssl --openssldir=/usr/local/openssl
# make
# make install

必要そうなパッケージを入れたのでコンパイルしてみる。

# cd
# cd nginx-1.16.1
# ./configure
#  make
# make install

普通にコンパイルできた。
参考　ソースファイルからnginxのインストール

インストしたパッケージを使う様に
openSSLとスレッドプールを設定に追加してみる。

# cd
# cd nginx-1.16.1
# make clean
# ./configure  --with-openssl=/usr/local/src/openssl
-1.1.0f --with-threads
checking for OS
 + Linux 4.4.184.alpine.1 armv7l
checking for C compiler ... found
 + using GNU C compiler
 + gcc version: 4.9.2 (Debian 4.9.2-10+deb8u2)
checking for gcc -pipe switch ... found
checking for -Wl,-E switch ... found
checking for gcc builtin atomic operations ... found
checking for C99 variadic macros ... found
checking for gcc variadic macros ... found
checking for gcc builtin 64 bit byteswap ... found
checking for unistd.h ... found
checking for inttypes.h ... found
checking for limits.h ... found
checking for sys/filio.h ... not found
checking for sys/param.h ... found
checking for sys/mount.h ... found
checking for sys/statvfs.h ... found
checking for crypt.h ... found
checking for Linux specific features
checking for epoll ... found
checking for EPOLLRDHUP ... found
checking for EPOLLEXCLUSIVE ... not found
checking for O_PATH ... found
checking for sendfile() ... found
checking for sendfile64() ... found
checking for sys/prctl.h ... found
checking for prctl(PR_SET_DUMPABLE) ... found
checking for prctl(PR_SET_KEEPCAPS) ... found
checking for capabilities ... found
checking for crypt_r() ... found
checking for sys/vfs.h ... found
checking for nobody group ... not found
checking for nogroup group ... found
checking for poll() ... found
checking for /dev/poll ... not found
checking for kqueue ... not found
checking for crypt() ... not found
checking for crypt() in libcrypt ... found
checking for F_READAHEAD ... not found
checking for posix_fadvise() ... found
checking for O_DIRECT ... found
checking for F_NOCACHE ... not found
checking for directio() ... not found
checking for statfs() ... found
checking for statvfs() ... found
checking for dlopen() ... not found
checking for dlopen() in libdl ... found
checking for sched_yield() ... found
checking for sched_setaffinity() ... found
checking for SO_SETFIB ... not found
checking for SO_REUSEPORT ... found
checking for SO_ACCEPTFILTER ... not found
checking for SO_BINDANY ... not found
checking for IP_TRANSPARENT ... found
checking for IP_BINDANY ... not found
checking for IP_BIND_ADDRESS_NO_PORT ... not found
checking for IP_RECVDSTADDR ... not found
checking for IP_SENDSRCADDR ... not found
checking for IP_PKTINFO ... found
checking for IPV6_RECVPKTINFO ... found
checking for TCP_DEFER_ACCEPT ... found
checking for TCP_KEEPIDLE ... found
checking for TCP_FASTOPEN ... found
checking for TCP_INFO ... found
checking for accept4() ... found
checking for eventfd() ... found
checking for int size ... 4 bytes
checking for long size ... 4 bytes
checking for long long size ... 8 bytes
checking for void * size ... 4 bytes
checking for uint32_t ... found
checking for uint64_t ... found
checking for sig_atomic_t ... found
checking for sig_atomic_t size ... 4 bytes
checking for socklen_t ... found
checking for in_addr_t ... found
checking for in_port_t ... found
checking for rlim_t ... found
checking for uintptr_t ... uintptr_t found
checking for system byte ordering ... little endian
checking for size_t size ... 4 bytes
checking for off_t size ... 8 bytes
checking for time_t size ... 4 bytes
checking for AF_INET6 ... found
checking for setproctitle() ... not found
checking for pread() ... found
checking for pwrite() ... found
checking for pwritev() ... found
checking for sys_nerr ... found
checking for localtime_r() ... found
checking for clock_gettime(CLOCK_MONOTONIC) ... found
checking for posix_memalign() ... found
checking for memalign() ... found
checking for mmap(MAP_ANON|MAP_SHARED) ... found
checking for mmap("/dev/zero", MAP_SHARED) ... found
checking for System V shared memory ... found
checking for POSIX semaphores ... not found
checking for POSIX semaphores in libpthread ... found
checking for struct msghdr.msg_control ... found
checking for ioctl(FIONBIO) ... found
checking for struct tm.tm_gmtoff ... found
checking for struct dirent.d_namlen ... not found
checking for struct dirent.d_type ... found
checking for sysconf(_SC_NPROCESSORS_ONLN) ... found
checking for sysconf(_SC_LEVEL1_DCACHE_LINESIZE) ... found
checking for openat(), fstatat() ... found
checking for getaddrinfo() ... found
checking for PCRE library ... found
checking for PCRE JIT support ... found
checking for zlib library ... found
creating objs/Makefile
Configuration summary
  + using threads
  + using system PCRE library
  + using OpenSSL library: /usr/local/src/openssl-1.1.0f
  + using system zlib library
  nginx path prefix: "/usr/local/nginx"
  nginx binary file: "/usr/local/nginx/sbin/nginx"
  nginx modules path: "/usr/local/nginx/modules"
  nginx configuration prefix: "/usr/local/nginx/conf"
  nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
  nginx pid file: "/usr/local/nginx/logs/nginx.pid"
  nginx error log file: "/usr/local/nginx/logs/error.log"
  nginx http access log file: "/usr/local/nginx/logs/access.log"
  nginx http client request body temporary files: "client_body_temp"
  nginx http proxy temporary files: "proxy_temp"
  nginx http fastcgi temporary files: "fastcgi_temp"
  nginx http uwsgi temporary files: "uwsgi_temp"
  nginx http scgi temporary files: "scgi_temp"
# make
# make install
# cd /usr/local/nginx/sbin
# nginx -V
built by gcc 4.9.2 (Debian 4.9.2-10+deb8u2)




コメントを残す

メールアドレスが公開されることはありません。 ※ が付いている欄は必須項目です

CAPTCHA